Energrease HTG 2 Stempet suhu tinggi

Energrease HTG 2 High Temperature Bearing Grease Description Energrease HTG 2 is a non melting grease for the lubrication of bearings at high temperatures. It has no drop point. This grease is based on an oxidation resistant, thermally stable base oil and an inorganic thickener. Application Energrease HTG 2 is suitable for the lubrication of rolling and plain bearings of all sizes and types at high temperature, such as in carriages for hardening, drying in tunnel ovens, also in bearings of bitumen mixing plants, cranes in foundries, hot air blowers, etc. Energrease HTG 2 can be used at a temperature range of -20 to +150 °C, and for short periods at a temperature of up to +220 °C. Where high temperatures are combined with high speed, more frequent re-greasing or grease change is necessary. Main Performance Features • High oxidation stability. • wide range temperature of application. • easy to dispense. • Good protection against corrosion. • Reduces mechanical wear. Packaging and Storage Supplied in packs of approximately 18 kg pails and 180 kg drums. Note the actual pack size may vary according to country of supply. Where outdoor storage is unavoidable, packs should be covered. Ensure packs are tightly resealed after use and that they have not been contaminated in any way. Additional Information In order to minimise potential incompatibilities when converting to new grease, all previous lubricant should be removed as much as possible prior to operation. During initial operation, re-lubrication intervals should be monitored closely to ensure all previous lubricant is purged.